Search results for "chemistry [Arsenates]"
showing 10 items of 2372 documents
Variations in the Chemical Composition of the Essential Oil of Lavandula angustifolia Mill., Moldoveanca 4 Romanian Variety
2020
International audience; In this research, the variations in the chemical composition of the Lavandula angustifolia Mill. essential oil, the Romanian variety Moldoveanca 4, obtained from the same culture, in the same harvesting and extraction conditions, during the years 2016-2018, representing the years 2-4 of culture. Lavandula angustifolia Mill. flowers were supplied from an ecological-crops from N-E Romania and the essential oils were obtained by hydro distillation of freshly harvested flowers. To determine the chemical composition, the essential oil was semi-quantitatively analysed by using gas chromatography coupled with mass spectrometry (GC-MS). In all the samples, 30 organic compoun…
Geochemical fingerprints of brannerite (UTi 2 O 6 ): an integrated study
2020
AbstractBrannerite (UTi2O6) is among the major uranium-bearing minerals found in ore deposits, however as it has been long considered as a refractory mineral for leaching it is currently disregarded in ore deposits. Brannerite is found in a variety of geological environments with the most common occurrences being hydrothermal and pegmatitic. On the basis of scanning electron microscopy observations coupled with electron probe micro-analyses and laser ablation inductively-coupled plasma mass spectrometer analyses, this study describes the morphological features and the major- and trace-element abundances of brannerite samples from five hydrothermal and five pegmatitic localities across the w…
Salt release monitoring with specific sensors in "in vitro" oral and digestive environments from soft cheeses
2012
International audience; The objective of the present work is to demonstrate the interest and the feasibility of the measurement of NaCl concentrations in soft cheeses and in particular an in vitro digestion process by the use of chemical sensors. The analyzed matrices were the commercial Italian mozzarella cheeses and domestic cheese base models. The classification of mozzarellas was performed according to their salinity, while the breakdown of cheese base models has been followed both at initial steps of digestion in artificial mouth dispositive mimicking the oral sphere and in a gut-imitating digester (TIM-1). During the breakdown of soft cheese in the digester, the estimated values for N…
Post-synthesis alumination of MCM-41: Effect of the acidity on the HDS activity of supported Pd catalysts
2010
Abstract Siliceous MCM-41 with different amount of alumina, from 0.25 up to 4.0 wt%, were prepared by impregnation of the MCM-41 with aqueous solution of Al(NO) 3 ·9H 2 O. The modified mesoporous silicas were then used as supports for Pd catalysts prepared by wet-impregnation from PdCl 2 precursor. Supports and corresponding Pd catalysts were characterized by XRD, XPS and NH 3 -TPD. The catalytic behavior was tested in the hydrodesulfurization (HDS) reaction of thiophene. An increase of the hydrodesulfurization activity with increasing alumina amount up to 0.5 wt% was observed. On the basis of the acidity change of the support and the structural modification underwent by the deposited palla…
Removal of Fe(III) from synthetic wastewater into raw and modified clay: Experiments and models fitting
2017
Water pollution by heavy metal ions has become a serious environmental issue especially due to their toxicity and tendency to bioaccumulation. Natural smectite clay was treated using sulfuric acid ...
Lignin-based activated carbon-supported metal oxide catalysts in lactic acid production from glucose
2021
Abstract In this study, heterogeneous biomass-based activated carbon-supported metal oxide catalysts were prepared and tested for lactic acid production from glucose in aqueous solution. Activated carbons were produced from hydrolysis lignin by chemical (ZnCl2) or steam activation and modified with a nitric acid treatment and Sn, Al, and Cr chlorides to obtain carbon-based metal oxide catalysts. The modification of the carbon support by nitric acid treatment together with Sn and Al oxides led to an increase in lactic acid yield. The highest lactic acid yield (42 %) was obtained after 20 min at 180 °C with the Sn/Al (5/2.5 wt.%) catalyst on steam-activated carbon treated by nitric acid. Reus…
TAP reactor study of the deep oxidation of propane using cobalt oxide and gold-containing cobalt oxide catalysts
2009
Abstract A transient reactor study of the oxidation of propane to CO 2 on gold-free and gold-doped CoO x catalysts has been carried out. It has been demonstrated that the presence of gold markedly promotes the catalytic reactivity of cobalt oxide in the total oxidation of propane. Both catalysts oxidised propane directly to CO 2 via a Mars–Van Krevelen mechanism, and this was confirmed using isotopically labelled oxygen experiments. The increased activity of the gold catalyst is related to the faster reoxidation of the cobalt oxide when gold is present in the catalyst, since the reaction step in which the catalyst is reduced, due to propane oxidation, is similar for both catalysts. The fast…
The effect of gold addition on the catalytic performance of copper manganese oxide catalysts for the total oxidation of propane
2011
Mixed copper manganese oxide catalysts (Hopcalite) have been studied for the total oxidation of propane, as a model for hydrocarbon volatile organic compound emission control. Catalysts were prepared using coprecipitation with and without gold. Calcination temperature influenced the catalyst activity and those prepared at 300 °C were the most active. Characterization showed that the catalysts had a nanowire-type morphology, and for those containing gold it was present as metallic particles occluded within the nanowires. The incorporation of gold into the catalyst enhanced the activity for propane conversion, but the presence of gold did not noticeably enhance the light-off activity. Althou…
Catalytic activity of solvated and unsolvated lanthanide halides in Friedel–Crafts acylations
2000
Abstract Anhydrous lanthanide halides — chlorides and bromides — can act as homogeneous catalysts of Friedel–Crafts acylations. The catalytic activity is related to the solubility of these anhydrous salts. More soluble THF or dioxane (Diox.) neodymium and samarium adducts are more active catalysts.
Synthesis, Characterization, and Cu(2+) Coordination Studies of a 3-Hydroxy-4-pyridinone Aza Scorpiand Derivative.
2016
The synthesis, acid-base behavior, and Cu(2+) coordination chemistry of a new ligand (L1) consisting of an azamacrocyclic core appended with a lateral chain containing a 3-hydroxy-2-methyl-4(1H)-pyridinone group have been studied by potentiometry, cyclic voltammetry, and NMR and UV-vis spectroscopy. UV-vis and NMR studies showed that phenolate group was protonated at the highest pH values [log K = 9.72(1)]. Potentiometric studies point out the formation of Cu(2+) complexes of 1:2, 2:2, 4:3, 1:1, and 2:1 Cu(2+)/L1 stoichiometries. UV-vis analysis and electrochemical studies evidence the implication of the pyridinone moieties in the metal coordination of the 1:2 Cu(2+)/L1 complexes. L1 shows …